![]() ![]() Some software/hardware doesn't allow this though because of aperage draw, signals, hardware limitations, etc. whichever is available).Īs for not losing your current setup to do this, does your sound card software allow switching signals at the jack? (like choose which jack does what) If so, you can set one to AUX-OUT1 and use it for your current computer speaker setup then set another to AUX-OUT2 and send that one to your AMP. I recommend connecting any output from a computer to the AUX-IN of an AMP (or LD-VCR jack. It would result in an extremely loud blast of sound if you're not careful. Of course, if you have digital audio out on your computer and digital audio in on your stereo system, you would just connect those instead of using a 3.5mm splitter.īrian, I agree, I don't think using the PHONO input would be such a good idea since the AMP usually pre-amplifies the signal much higher than the other channels before going to the mixer and outputs. On the PC side, you would plug the 3.5mm splitter into your sound card's speaker port (usually color-coded green), then plug the speakers and amp into the splitter. To answer question 3: on the amp side, you probably want to plug into the AUX input. If you need one with bare wires, I'd just go to Radio Shack or a similar store and buy the 3.5mm headphone connector, then solder it to some speaker wire. If you can hook the digital audio output up to your stereo equipment, you won't have to buy a splitter, and the audio quality won't be affected by the integrated sound card's amp.Īs for question 2, you'll just need a cable with a 3.5mm headphone plug on one end and whatever your amp takes on the other end-either bare wires, banana plugs, or RCA plugs. My desktop has both, and even my 6-year-old laptop came with an adapter cable that gives me coax digital audio output (as well as composite video and S-video). Last, this may be obvious, but does your computer have a digital audio output? A lot of computers now have either a coax digital out (looks like a back or orange RCA connector), or an optical digital out. The integrated amps on sound cards are sometimes very noisy. If you get a lot of hiss using a stereo splitter, you might want to turn down the volume on your computer and let your large amp do the work. You can also get 3.5mm stereo splitters with independent volume controls on the outputs, such as the Griffin SmartShare.If you have Vista or Win7, you can just use a different music player when you want to play music through your stereo system. Windows Vista (and probably Windows 7) has independent volume controls for each app. ![]() Some amps save a separate volume for each input. ![]() There are a few possible workarounds for this problem, though: For instance, you might have to crank up the volume out to your computer speakers to make them audible, but the same volume going to your amp could rumble the house-so you then have to either turn down the computer volume, or turn down the amp. ![]() The only thing that might be annoying, depending on your OS and your amp, is the fact that you'll have to constantly fiddle with 2 different volume controls. To answer question #1: a basic 3.5 mm stereo splitter will work fine. A link to a website with how-to instructions would be great, but I can't find one with Google. I think understand the principles involved, but I'm not great on visualizing the particulars. Which inputs on the tuner do I connect to (I've got MONITOR, PHONO and AUX), and which output socket on the sound card do I connect from? Will the cable have to be split: bare wires on the amplifier end and a mini-RCA connector on the sound card end? How do I do this? How can I do this and still leave my present computer speakers connected (there's probably only one output from the sound card?)? Would I need an additional sound card? Some particular issues that I'm having trouble with (there may be others I haven't thought of yet): It seems obvious that I have to connect a wire from the sound card to the amplifier (I guess auxiliary?) inputs on the back. How can I wire things up so that I can hear computer sound output on the external-amplifier-speakers? I have an audio system with a tuner (amplifier) and A and B speakers in a different part of the house. I have a computer with an integrated sound card, and speakers. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |